View LM336BM-25_3332193.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lm136-2.5/lm236-2.5/lm336-2.5v reference diode general description the lm136-2.5/lm236-2.5 and lm336-2.5 integrated cir- cuits are precision 2.5v shunt regulator diodes. these monolithic ic voltage references operate as a low-temperature-coefficient 2.5v zener with 0.2 w dynamic impedance. a third terminal on the lm136-2.5 allows the ref- erence voltage and temperature coefficient to be trimmed easily. the lm136-2.5 series is useful as a precision 2.5v low volt- age reference for digital voltmeters, power supplies or op amp circuitry. the 2.5v make it convenient to obtain a stable reference from 5v logic supplies. further, since the lm136-2.5 operates as a shunt regulator, it can be used as either a positive or negative voltage reference. the lm136-2.5 is rated for operation over ?55c to +125c while the lm236-2.5 is rated over a ?25c to +85c tem- perature range. the lm336-2.5 is rated for operation over a 0c to +70c temperature range. see the connection diagrams for avail- able packages. features n low temperature coefficient n wide operating current of 400 a to 10 ma n 0.2 w dynamic impedance n 1 % initial tolerance available n guaranteed temperature stability n easily trimmed for minimum temperature drift n fast turn-on n three lead transistor package connection diagrams to-92 plastic package ds005715-8 bottom view order number lm236z-2.5, lm236az-2.5, lm336z-2.5 or lm336bz-2.5 see ns package number z03a to-46 metal can package ds005715-20 bottom view order number lm136h-2.5, lm136h-2.5/883, lm236h-2.5, lm136ah-2.5, lm136ah-2.5/883 or lm236ah-2.5 see ns package number h03h may 1998 lm136-2.5/lm236-2.5/lm336-2.5v reference diode ? 1999 national semiconductor corporation ds005715 www.national.com
connection diagrams (continued) typical applications so package ds005715-12 top view order number lm236m-2.5, lm236am-2.5, lm336m-2.5 or lm336bm-2.5 see ns package number m08a 2.5v reference ds005715-9 2.5v reference with minimum temperature coefficient ds005715-10 2 adjust to 2.490v * any silicon signal diode wide input range reference ds005715-11 www.national.com 2
absolute maximum ratings (note 1) if military/aerospace specified devices are required, please contact the national semiconductor sales office/ distributors for availability and specifications. reverse current 15 ma forward current 10 ma storage temperature ?60c to +150c operating temperature range (note 2) lm136 ?55c to +150c lm236 ?25c to +85c lm336 0c to +70c soldering information to-92 package (10 sec.) 260c to-46 package (10 sec.) 300c so package vapor phase (60 sec.) 215c infrared (15 sec.) 220c see an-450 asurface mounting methods and their effect on product reliabilityo (appendix d) for other methods of soldering surface mount devices. electrical characteristics (note 3) lm136a-2.5/lm236a-2.5 lm336b-2.5 parameter conditions lm136-2.5/lm236-2.5 lm336-2.5 units min typ max min typ max reverse breakdown voltage t a = 25c, i r = 1ma lm136, lm236, lm336 2.440 2.490 2.540 2.390 2.490 2.590 v lm136a, lm236a, lm336b 2.465 2.490 2.515 2.440 2.490 2.540 v reverse breakdown change t a = 25c, 2.6 6 2.6 10 mv with current 400 a i r 10 ma reverse dynamic impedance t a = 25c, i r = 1 ma, f = 100 hz 0.2 0.6 0.2 1 w temperature stability v r adjusted to 2.490v (note 4) i r = 1 ma, figure 2 0c t a 70c (lm336) 1.8 6 mv ?25c t a +85c 3.5 9 mv (lm236h, lm236z) ?25c t a +85c (lm236m) 7.5 18 mv ?55c t a +125c (lm136) 12 18 mv reverse breakdown change 400 a i r 10 ma 3 10 3 12 mv with current reverse dynamic impedance i r = 1 ma 0.4 1 0.4 1.4 w long term stability t a = 25c 0.1c, i r = 1 ma, 20 20 ppm t = 1000 hrs note 1: absolute maximum ratings indicate limits beyond which damage to the device may occur. electrical specifications do not apply when operating the devi ce beyond its specified operating conditions. note 2: for elevated temperature operation, t j max is: lm136 150c lm236 125c lm336 100c thermal resistance to-92 to-46 so-8 q ja (junction to ambient) 180c/w (0.4" leads) 440c/w 165c/w 170c/w (0.125" lead) q ja (junction to case) n/a 80c/w n/a note 3: unless otherwise specified, the lm136-2.5 is specified from ?55c t a +125c, the lm236-2.5 from ?25c t a +85c and the lm336-2.5 from 0c t a +70c. note 4: temperature stability for the lm336 and lm236 family is guaranteed by design. design limits are guaranteed (but not 100 % production tested) over the in- dicated temperature and supply voltage ranges. these limits are not used to calculate outgoing quality levels. stability is defined as the maximum ch ange in v ref from 25c to t a (min) or t a (max). www.national.com 3
typical performance characteristics reverse voltage change ds005715-21 zener noise voltage ds005715-22 dynamic impedance ds005715-23 response time ds005715-24 reverse characteristics ds005715-25 forward characteristics ds005715-26 temperature drift ds005715-27 www.national.com 4
application hints the lm136 series voltage references are much easier to use than ordinary zener diodes. their low impedance and wide operating current range simplify biasing in almost any circuit. further, either the breakdown voltage or the temperature co- efficient can be adjusted to optimize circuit performance. figure 1 shows an lm136 with a 10k potentiometer for ad- justing the reverse breakdown voltage. with the addition of r1 the breakdown voltage can be adjusted without affecting the temperature coefficient of the device. the adjustment range is usually sufficient to adjust for both the initial device tolerance and inaccuracies in buffer circuitry. if minimum temperature coefficient is desired, two diodes can be added in series with the adjustment potentiometer as shown in figure 2 . when the device is adjusted to 2.490v the temperature coefficient is minimized. almost any silicon signal diode can be used for this purpose such as a 1n914, 1n4148 or a 1n457. for proper temperature compensation the diodes should be in the same thermal environment as the lm136. it is usually sufficient to mount the diodes near the lm136 on the printed circuit board. the absolute resis- tance of r1 is not critical and any value from 2k to 20k will work. ds005715-28 figure 1. lm136 with pot for adjustment of breakdown voltage (trim range = 120 mv typical) ds005715-29 figure 2. temperature coefficient adjustment (trim range = 70 mv typical) low cost 2 amp switching regulator 2 ds005715-5 * l1 60 turns # 16 wire on arnold core a-254168-2 2 efficiency ? 80 % www.national.com 5
application hints (continued) precision power regulator with low temperature coefficient ds005715-13 5v crowbar ds005715-14 trimmed 2.5v reference with temperature coefficient independent of breakdown voltage ds005715-15 * does not affect temperature coefficient adjustable shunt regulator ds005715-6 www.national.com 6
application hints (continued) linear ohmmeter ds005715-16 www.national.com 7
application hints (continued) op amp with output clamped ds005715-17 bipolar output reference ds005715-18 2.5v square wave calibrator ds005715-19 5v buffered reference ds005715-30 low noise buffered reference ds005715-31 www.national.com 8
schematic diagram ds005715-1 www.national.com 9
10
physical dimensions inches (millimeters) unless otherwise noted order number lm136h-2.5, lm136h-2.5/883, lm236h-2.5, lm136ah-2.5, lm136ah-2.5/883 or lm236ah-2.5 ns package number h03h small outline (so) package (m) order number lm236m-2.5, lm236am-2.5, lm336m-2.5 or lm336bm-2.5 ns package number m08a www.national.com 11
physical dimensions inches (millimeters) unless otherwise noted (continued) life support policy national's products are not authorized for use as critical components in life support de- vices or systems without the express written approval of the president of national semi- conductor corporation. as used herein: 1. life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. national semiconductor corporation americas tel: 1-800-272-9959 fax: 1-800-737-7018 email: support@nsc.com www.national.com national semiconductor europe fax: +49 (0) 1 80-530 85 86 email: europe.support@nsc.com deutsch tel: +49 (0) 1 80-530 85 85 english tel: +49 (0) 1 80-532 78 32 fran?ais tel: +49 (0) 1 80-532 93 58 italiano tel: +49 (0) 1 80-534 16 80 national semiconductor asia pacific customer response group tel: 65-2544466 fax: 65-2504466 email: sea.support@nsc.com national semiconductor japan ltd. tel: 81-3-5639-7560 fax: 81-3-5639-7507 to-92 plastic package (z) order number lm236z-2.5, lm236az-2.5, lm336z-2.5 or lm336bz-2.5 ns package number z03a lm136-2.5/lm236-2.5/lm336-2.5v reference diode national does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and national reserves the righ t at any time without notice to change said circuitry and specifications.

▲Up To Search▲

Price & Availability of LM336BM-25

	To Download LM336BM-25 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .